| Driving trip fault "emergency approach" should be noted that "eight defense"
|
| Release time：2014.05.03 News source：Taizhou Lixin Pneumatic Tool Plant Browsing number： |
Cars with faulty emergency in 10 ways, Ericsson fittings give you the answer:
1 tank damage
Motor vehicles in use, found that leak from the tank, oil spills can be wiped clean place, with soap or bubble gum coated in oil at the temporary blockage; with epoxy adhesive patch, the better.
2 pipeline rupture
Can be ruptured pipeline rupture when rubbed clean, apply soap, with a cloth or tape wrapped around the pipe rupture and tied tightly with wire and then coated with a layer of soap.
3 pipe break
Can find a compatible with tubing diameter rubber or plastic tubing pipe sockets when broken. If the socket is not tight enough, then both ends of the wire tied tight to prevent leakage.
4 head appeared trachoma and oil spills, leaks
According to trachoma size, choose the appropriate specifications for electrical fuses, hand hammer gently drop into the blisters, you can eliminate oil spills, leaks.
5. Tubing joints leak
When using a motor vehicle, such as engine oil pipe joints leak, mostly flared tubing and tubing nut is not sealed due. Available yarn wound on the edge of the next speaker, then the tubing and tubing fittings and tighten the nut; can also be chewed bubble gum or maltose into a paste, applied to the seat tubing nut mouth, let it dry condensate newcomer seal.
6 inlet and outlet hose rupture
Rupture is not available coated with a layer of soap wrapped cloth leaks; such as rupture is large, you can cut the hose rupture, put in the middle of a bamboo or iron pipe, and tight wire bundles.
7 broken fan belt
The belt can be put off or using iron Sizha good way to open the stop the car drove away.
8 screw slider
Screw slider will result in spills or rod loose, it does not work. Repairs can be original screw with a hammer pounding flat, so both sides of the expansion increases again tightened well, but not many times demolished, this time until the next maintenance time.
9 or diaphragm pump diaphragm rupture or break
Remove the diaphragm pump can be disassembled, with plastic wood, electrical insulation bakelite or plastic sheeting to the original shape, size, saw filing shaping and polishing installed.
10. Valve spring break
After the valve spring break, spring break can be removed to turn off the two installed, you can use. May also find a 1 mm thick metal, cut into 1 mm than the diameter of the spring disc, cut a hole inside diameter smaller than the spring diameter 4 mm, 6 mm outer edge every 4 mm length of cut rip, cut After every one folded a form-sided spring slot, and then turn around a spring loaded metal tank can be used.
Hot summer, Ericsson fittings to remind everyone to drive the process, we need to be careful of eight defense:
An anti-drowsy
Summer traffic, the cab temperature is high, the drivers physical exertion, fatigue, dozing. Therefore, to maintain adequate sleep, rest, to ensure energetic. Driving in case of drowsiness occurs, stop in time, proper rest for a while, rinse with cold water or head and face, limbs, to be energy recovery, sober and then continue driving to ensure road safety.
Second, heatstroke
Good cab driver sunstroke work. Conditional, should be installed in the cab fan or air conditioning. Drivers should bring with him the water bottle and towel, and prepare good Dan, cool oil, oil, water and other Huoxiangzhengqi heatstroke drugs. During the day driving the front windshield can be opened, put on his glasses to reduce direct sunlight; night driving may not open the front windshield to prevent mosquito suddenly bruised eye accidents.
Third, the lightning storm
Summer thunderstorms often, typhoons, tornadoes and other severe weather occurs, so that the driver by surprise. Therefore, drivers should pay attention to weather forecasts before moving to bring rain gear if necessary, to prevent people and goods by leaching. When inclement weather occurs, the road traffic chaos, when drivers should be especially careful, low speed and, when necessary, choose a safe place parking shelter in case of lightning.
Fourth, anti distress
In the hot days during the summer or student put, increasing people's outdoor activities, especially in the early morning, evening and night periods, such as a cooler, drivers should pay particular attention to the road, bridge, shade, etc., to prevent the collision pressure shade sleeping person. When the vehicle through the sun has paved food crops or road, to prevent vehicle skidding or repeated rolling fire.
Five anti-puncture
Summer outside temperature is high, the tire heating up fast, heat is difficult, so in the road should always check the tire pressure, tire inflation pressure should generally be 2-3% lower than the standard pressure. When they find a tire overheating, air pressure is too high, the car should be parked in the cool shade, and in no way to cool off by splashing water, and do not bleed blood pressure. Otherwise, make the tires cold shrink unevenly, causing damage to the carcass off the air early.
Six anti-vapor lock
The higher the temperature, the faster the evaporation of fuel, the more likely form a "vapor lock" in the oil circuit. Does not prevent the occurrence of the fuel system, "vapor lock" can be installed between the exhaust manifold and the fuel pump or put a piece of asbestos insulation board with a damp cloth (or water-soaked sandbags) on the pump and watering regularly to keep moist to reduce the "air resistance" generated. In the event of "vapor lock" so that the oil is interrupted, should be immediately stopped to rest, until the temperature drops after the demolition of the gasifier inlet pipe fittings, hand pumps pulled rocker, can be ruled out. "Vapor lock."
Seven, anti-water
Summer travel, check the cooling water should always pay attention to the water, to observe the water temperature gauge, engine temperature generally does not exceed 95 ℃. When they find the tank boil, severe water shortages, to stop immediately, but can not open the radiator cap immediately add water to avoid burns, be idling, stalling until cool and then add water to prevent sticking cylinder and piston engine burst or deformation.
Eight, anti-oil dilute
High summer temperatures, so that the oil thinning viscosity decreased antioxidant deteriorate, resulting in poor lubrication. So summer is timely cleaning and maintenance oil filter, oil cooler to keep the crankcase ventilation, good heat dissipation.
|
| |
|
|
|
|
Name：Taizhou Lixin Pneumatic Tool Plant
Add：Economic Development Zone, Yuhuan City, ZheJiang Province, China.
Mobile：+86-18967648088
+86-18969685855
Fax：0576-87253572
Web：http://www.lxqdgj.com |
|
