| "Turbo models' maintenance
|
| Release time：2014.05.17 News source：Taizhou Lixin Pneumatic Tool Plant Browsing number： |
With the approaching limit fuel consumption, the automotive industry has become very urgent in the choice of energy-saving technology route, due to the current environment commercialization of new energy vehicles immature, industry still needs a long time, the recent lowering fuel consumption car companies will focus on the energy-saving technology of traditional internal combustion engine, turbocharger technology to become the preferred car prices. Here, Ericsson fittings to introduce you to turbo models with non-maintenance.
Turbo models maintenance "Yes"
Running for some time before the flame
After the high-speed operation of the engine for a long time, should be idling 3-5 minutes and then turn off. When the engine work, some of the oil supply turbocharger rotor bearing lubrication and for cooling. After running the engine suddenly stopped, the oil pressure to drop rapidly to zero, the high temperature reached turbocharger middle part of the heat bearing housing can not be taken away quickly, and high-speed rotation inertia turbocharger rotor while still Therefore, if the engine is hot state a sudden stop, causing retention turbocharger oil overheating and damage to the bearing and shaft. Particularly to prevent sudden flameout Meng kicks after the throttle.
Time to clean the air filter
Time to clean the air filter to prevent dust and other impurities from entering the high-speed rotation of the compressor impeller speed instability caused or exacerbated wear bushings and seals. Engine oil and filter must be kept clean to prevent debris from entering, otherwise oil lubrication capacity decreased, resulting in premature turbocharger scrapped.
Regular cleaning of turbocharger
According to Fong fittings understood demolition turbocharger, should be kept clean, all fittings must use a clean cloth to plug well, prevent debris falling into the turbocharger rotor damage. Due to high temperatures often in the turbocharger operation, its oil pipeline due to high temperature, internal oil prone parts of coke, this will result in insufficient lubrication of the bearing turbocharger damage. Thus, oil pipeline after running for some time to be cleaned.
Turbo models maintenance "non"
Above and select oil
In the "drink" of oil, the turbocharger is indeed more "delicate", in addition to the naturally aspirated engine bigger than some of the ordinary, the demand for oil is also higher. Because the design of the turbocharger and naturally aspirated engines, the main floating shaft design, filled with oil between the turbine shaft and the main body, the main shaft to rely on the cooling and lubrication oil, and low-grade oil, viscous high degree of poor liquidity, better not play a role.
Meng throttle when starting
Increase speed in a short time is a major feature of turbocharged cars, but this does not mean that car owners can be rude, in fact, just after the start Meng throttle easily damaged turbocharger seal. High rpm turbo engine, start the vehicle, you can not slam the accelerator pedal.
Disassemble the engine
Turbocharger rotor bearing high precision, working environment requires maintenance and installation is also very strict, so when the turbocharger failure or damage to the designated repair station should be repaired, but not to the street repair shop . Experienced teacher introduced turbocharger removal and replacement is very particular.
According to Fong noted fittings, power performance, and cost is an issue of concern to the consumer focused, now appears to turbo represented by the traditional technology can better meet consumers save energy while in pursuit.
In the slow development of new energy industry of the moment, it is time to re-sort cheqi own development strategy and future technology roadmap, you need to sort out the power system through a combination of strategic R & D budget in a reasonable allocation of different power systems, and how to quickly enhance engine performance will continue to be the primary task of car prices.
|
| |
|
|
|
|
Name：Taizhou Lixin Pneumatic Tool Plant
Add：Economic Development Zone, Yuhuan City, ZheJiang Province, China.
Mobile：+86-18967648088
+86-18969685855
Fax：0576-87253572
Web：http://www.lxqdgj.com |
|
