Englishchina
  • Fittings 01
  • Fittings 02
  • Fittings 03
  • 1
  • 2
  • 3
  News
Air to water heater maintenance daily pay attention to what matters
Release time:2014.10.31 News source:Taizhou Lixin Pneumatic Tool Plant Browsing number:

Commercial air to the water heater into the market has more than ten years, anddomestic air to water heater before the rise in recent years, domestic air to water heater awareness and certainly not commercial air to water heater. According toLixin professional pipe joint informed but with the promotion of energy-saving emission reduction, domestic air heaters can also gradually let ordinary families to accept, but a lot of people on the air can still have a superficial knowledge of. Air to water heater in daily use should pay special attention to what matters, in order to achieve the best effect of use?

Air is a higher degree of automation equipment, regular inspection unit state when in use, if the maintenance of long-term effective unit, operation reliability andservice life of turbine will get beat all raise. Outside the installation of water filtershould be cleaned regularly, ensure the system water clean, to avoid the unit because of dirty filter plugging caused by damage to the host. Lixin professionalpipe joint said users should pay attention to in the use and maintenance of heat pump unit: all safety protection device are finished in factory settings, not todismantle or adjust.

Air can often check the power supply wiring and electrical system unit of the water heater is strong, whether there are electrical components abnormal movements, if timely repair and replacement. Lixin professional pipe joint known to regularly checkwater system of replenishment, water tank safety valve, liquid level controller and an exhaust device is working properly, so as to avoid air entering the system to reduce the volume of water, thus affecting the reliability of system and unit heat of boiler turbine units. Check the water pump, water valve is normal, whether theleakage of water pipe and pipe joint. Around the unit should be kept clean and dry,well ventilated. The annual cleaning air side heat exchanger, to maintain the good effect of heat transfer.

The work conditions of each component inspection unit frequently, check the pipe joints and whether there is oil charging valve, ensure no leakage of refrigerant units. Do not stack debris around the unit to prevent blockage of air inlet and outlet, set around should be kept clean and dry, well ventilated. If the downtime is longer, should let go of unit of the water in the pipeline, and cut off the power, sets a good shield.

When the air to the water heater outlet temperature and the actual unit controlpanel display numerical inconsistencies, please check the temperature sensing device is good contact. Unit fails, the user can not be solved, please report to theMinistry of after-sales service repair, and inform the fault code, in order to send a timely maintenance. The condenser cleaning every two years, experts recommendusing 50 DEG -60 DEG, concentration of hot phosphoric acid solution cleaningcondenser fifteen percent, Lixin professional pipe joint remind start the host comes with circulating water pump cleaning for three hours, finally washed with tap waterthree times. For cleaning nozzle. Prohibit the use of corrosive cleaning fluid cleaning condenser. By maintaining the daily order, air to water heater can give you energy saving plus comfort and safety of hot water life experience.

 
 
  Contact us
Name:Taizhou Lixin Pneumatic Tool Plant
Add:Economic Development Zone, Yuhuan City, ZheJiang Province, China.
Mobile:+86-18967648088 +86-18969685855
Fax:0576-87253572
Web:http://www.lxqdgj.com