Englishchina
  • Fittings 01
  • Fittings 02
  • Fittings 03
  • 1
  • 2
  • 3
  News
How to choose a good car wiper blade
Release time:2015.01.16 News source: Browsing number:

Many owners do not know what is the note to buy wiper blade? How much is thereplacement cycle of wiper blade? Lixin analysis when the eyes blurred vision drivingis very dangerous pipe joint professional, so use the wiper in our driving very important. In fact, the use of many owners of windscreen wiper and daily maintenanceis not enough attention, which leads to the wiper does not work well, especially thewiper blade premature damage, even causing some damage to the front windshield glass.

According to Lixin professional pipe joint informed driving rain wiper blade and is due to aging caused by traffic accident rate, higher than usual for several times. On the one hand, the frequency of use of rain wiper is quite high, especially in the area in the South rainy, wiper wiper number every year tens of thousands or even hundreds of thousands; on the other hand, the working environment of the wiper blade is very bad,be faced with exposure to heat, cold and bitter, dust, acid rain, corrosion and wind erosion, so the wiper working life is very limited.

Wiper species currently generally has two kinds: one kind is the traditional intermittenttype, this is generally the most common wiper, three to four paragraphs by unequal,drivers do adjust in accordance with the rain and the viewing conditions. Anotherraindrop induction, in recent years the use of the high-class car model. Choose agood pair of wiper blade, there are six issues need attention.

First, first make sure your car is used in which the specifications of the wiper blade,can refer to vehicle manual, have a look the above stated wiper models. In general,wiper blade can joint the metal supporting rod together to sell, sell little single blade. Ifthey do not know, can let the parts shop clerk to help distinguish.

Second, must pay attention to the way of supporting rod connected to the wiper arm is matched, because some of the arm is fixed to the rocker arm screws, to buy time toremember to pay attention to.

Third, the wiper pull up, with your fingers after cleaning the rubber wiper blade on the touch, check whether there is damage, and the rubber blade elastic how. If the leaf aging, hardening, cracks, the wiper blade is not qualified.

Fourth, check the wiper status, and the existence of pole wiper swing or uneven leakage scraping phenomenon. If the following three kinds of circumstances, explain the unqualified the wiper blade. Swing is not smooth, the wiper is not normal beat.Rubber contact surface and glass surface can not be fully fit, wipe the residueproduced. The glass surface presents water film state after wiping, produce striae, fog and linear residual glass.

Fifth, the pilot should pay attention to whether the abnormal motor noise, particular attention is that when the wiper motor humming sound and do not rotate wiper,illustrate the mechanical transmission part rust dead or stuck places, it should immediately turn off wiper switch, to prevent burning electric machine.

The correct use of automobile wiper blade

Lixin professional pipe joint said whatever type wiper, must be used by rainwater.Wiper blade is clear on the front windshield rain. There is no rain would not have to,must not be dry scraping. Because absolute increased friction, will cause damage toblade and wiper motor rubber!

Even if there is rain, if rainfall is enough to start the wiper films should not scratch. We must wait until the surface of the glass with enough rain. Here to say "enough" notstop driving line of sight. In addition, used to remove dust wiper windshield surface isnot recommended. Even if you want to do this, we must also sprayed glass of water,never can dry scraping. If there is something sturdy windshield, such as dry stoolDove Bird, can not directly use wiper hard scrape, please use the manual cleaning its droppings. The hard thing (if other large particles point gravel) extremely easy to cause the wiper sheet locally injured, causing rain scratch clean rainwater.

In addition, because some owners of the car wash properly, leading to prematuresome of wi, , per blade scrap. The glass surface is a thin layer of oil film on theautomobile factory. The car is after coarse wax on a program in the factory. Crudewax is while the first layer of wax heads the paint on its brightness is not high but the function of protective paint dead. The front windshield is also coarse wax treatment is uncertain, but the windshield surface formation is usually when it rains from the rainon the glass flow stains can figure it out.

The wiper blade is consumable, frequently check, timely replacement. Lixinprofessional pipe joints will be the front windshield is divided into 3 regions, regionwidth, two are for the entire windshield width of about 1 / 6, the middle area is theentire windshield width of about 2 / 3, this area is the main regional influence our vision. In several times after scraping brushing no scratches or on the two region only a few scratch, this wiper status should be considered normal, does not affect our mainview.

In several times after scraping brushing one scratch in the intermediate region; or theupper and lower region has a few scratches, while the middle area general notregularly two or three scratch; or regional scratches more, and the intermediate region also appeared many fixed scratches. Lixin professional pipe joint said these cases illustrate the wiper blades for some minor defects, the scratches have appeared in the main view, but because the scratch is slender, influence on the main view is not particularly serious, so you can continue to use in the short term, but the best replacement in a month.

In several times after scraping brushing in any region is the emergence of the widewater

 
 
  Contact us
Name:Taizhou Lixin Pneumatic Tool Plant
Add:Economic Development Zone, Yuhuan City, ZheJiang Province, China.
Mobile:+86-18967648088 +86-18969685855
Fax:0576-87253572
Web:http://www.lxqdgj.com