Every household cannot do without water heater, install a water heater often family to use for several years, the home take a shower of hot water requirements are higher,but the real understanding of the water heater users is really not much, water heaterto work every day should also be carefully protected, Lixin professional pipe joint is introduced use and maintenance methods about electric water heater for you.

1, turn off the power

For usually do not turn off power supply suggested users should check the water heater, the abnormal situation should be promptly sent to repair repair point, Lixinjoint is recommended every 3 years to the designated repair point replacement of atemperature controller and the heater professional tube.

2, tank cleaning

Any electrical appliance used for a long time will have dirt, water heater is also same,liner is best cleaned once every half a year, cleaning method is first cut off the power supply, close the inlet valve, then open the outlet valve, the drainage switch of the safety valve counterclockwise rotation of 90 degrees, the natural drain the water in the water heater and sediment, after the re-use of water cleaning. Cleaning is finished, and then the drainage switch to restore in situ, pay attention to water full rearelectricity.

3, clean up the mess

Water heater is used for a period of time after we will find the shower water reducing,Lixin professional pipe joint said it shows have debris blocking the outlet, then, we'llclean up to block debris timely, ensure the export unobstructed, do help to prolongthe service life of the water heater.

Electric water heater electricity saving tips

1, the choice of electric water heater with high quality, good reputation.

2, choose good insulation effect, with the anti scaling device of electric water heater.

3, area price execution, in the trough open, thermal insulation, peak period is closed,can reduce the electricity expenditure.

4, shower temperature setting in general 50~60 DEG C, no need of water should be timely shutdown, avoid repeated boiling of water.

5, if the home every day need to use hot water, and the water heater insulation effect is better, so we should let the water heater is always energized, and arranged in theinsulation state. Because insulation day electricity use, than to put a box of cold wateris heated to the same temperature electricity use less.

Lixin professional pipe joint teach you how to clean electric water heater

1, need to unplug the power supply in the electric water heater before cleaning,cutting off any form of heating electric water heater, electric water heater is closedunder cold water and hot water, the angle valve.

2, remove drain limiting device pressure valve wrench, using plastic pipes connected to the pressure relief valve pressure relief hole of the small tube, to lead out the inner water of the relief pressure valve, the wrench from the vertical position, turn 90 degrees, then the pressure relief valve has been opened.

Joint 3, open the hot water pipe of the metal hose, then should see from the pressure relief valve in the water out, let go the water storage in the liner, until the pressure relief valve orifice basically no water flows out, the inner water of basic have all put out, and with the release of the water in the inner container, most scale also have been discharged from the.

4, then, a hot water outlet metal hose for cold water pipes to the water heater on theangle valve, opening the cold water, cold water and hot water pipes made by rushing to the container, then you can see the pressure relief valve outlet to the outflow scalein mixed with water. Repeated many times to repeat this step, after repeated washing,from the relief valve water outlet in the water has been very clean, illustrate the basicclean liner.

5, a pressure relief valve is restored to its original appearance, lever will be re downagain with hot water, hot water pipeline is connected to the angle valve, cold water pipeline and the cold water valve is connected with the angle of open water,respectively, angle valve angle valve in hot water and cold water, hot water pipesconnected with the angle valve tap, open a hot water tap, tap water to heat up later,and then close the hot water tap, ensure that the container has been drained and filled with water in the air.

6, check whether there is leakage of each joint, if there is leakage to re connect, to ensure that each connection without leakage. Plug, plug in the electric water heaterpower on, check the heating situation, everything is normal, the cleaning work iscompleted.

Lixin professional pipe joint said under normal circumstances, as long as the abovesteps on the electric water heater cleaning, basically all we can clean it up. If you have too much trouble, can be removed after the water inlet and outlet pipes, shake thebody, let the liner in the water clean, water injection cleaning again, so wash three or four times on the line, is not it can ask professional repair technicians on-site service.