| Notes on installation of high pressure pipe fittings
|
| Release time：2017.06.10 News source：Taizhou Lixin Pneumatic Tool Plant Browsing number： |
(1) the hose is neither bent nor bent at the root of the moving or stationary, or bent at least 1.5 times its diameter;
(2) when the hose moves to the extreme position, it should not be pulled too tight and should be more relaxed;
(3) avoid twisting deformation of hose;
(4) hose as far as possible from thermal radiation components, necessary fashion insulation board;
(5) the external damage of the hose should be avoided, such as the long-term friction on the surface of the workpiece in use;
(6) if there is excessive deformation caused by the dead weight of the hose, it should be supported. |
| |
|
|
|
|
Name：Taizhou Lixin Pneumatic Tool Plant
Add：Economic Development Zone, Yuhuan City, ZheJiang Province, China.
Mobile：+86-18967648088
+86-18969685855
Fax：0576-87253572
Web：http://www.lxqdgj.com |
|
