Pipe joints have numerous types of the used pipe joints can generally be divided into two kinds of hard pipe joints and hose fittings. In accordance with the pipe fittings and pipe connections to the hard pipe joints flared, card sets and three welded hose fittings mainly Swaged hose connector.
     The connection of pipes and pipe joints in the hydraulic system, different pipe screwed into the end uses of the connecting thread. The taper thread by virtue of their own vertebral body tighten and use of substances such as polytetrafluoroethylene sealing operation, mainly used in the low pressure hydraulic system. Fine thread of the sealing effect is very good, is often used in high-pressure system, but it needs to use the a combination washer or O-ring against the end face of the closed, sometimes used copper washers, it is more suitable in connection wall thick pipeline, its part of the connector body, to take over and nut. When in use, the connector body is embedded in the target, will face seal used in conjunction with the front of said washer, by a rubber seal between the connector body and takeover, sometimes using spherical sealing manner.
     The pipe joints are removable connecting elements, it satisfies the normal connections are secure, sealing strong, reasonable size, pressure loss, and process performance requirements, but also must meet the requirements of disassembly convenience . Do small Look a little tube fitting, because it only exist in order to support the existence of the entire hydraulic system.　 Pipe joints have numerous types of the used pipe joints can generally be divided into two kinds of hard pipe joints and hose fittings. In accordance with the pipe fittings and pipe connections to the hard pipe joints flared, card sets and three welded hose fittings mainly Swaged hose connector.
     The connection of pipes and pipe joints in the hydraulic system, different pipe screwed into the end uses of the connecting thread. The taper thread by virtue of their own vertebral body tighten and use of substances such as polytetrafluoroethylene sealing operation, mainly used in the low pressure hydraulic system. Fine thread of the sealing effect is very good, is often used in high-pressure system, but it needs to use the a combination washer or O-ring against the end face of the closed, sometimes used copper washers, it is more suitable in connection wall thick pipeline, its part of the connector body, to take over and nut. When in use, the connector body is embedded in the target, will face seal used in conjunction with the front of said washer, by a rubber seal between the connector body and takeover, sometimes using spherical sealing manner.
     The pipe joints are removable connecting elements, it satisfies the normal connections are secure, sealing strong, reasonable size, pressure loss, and process performance requirements, but also must meet the requirements of disassembly convenience . Do small Look a little tube fitting, because it only exist in order to support the existence of the entire hydraulic system.